| 31" wide x 21" deep Overall height 60" Ring diameter 16" (Buddy the Macaw was jealous because he didn't have one so he got in the picture while climbing atop the closest at hand) We like this design because the grille lays flush on top of the tray so birds can't get to the crud in the tray. Both grille and tray slide out for easy cleaning. Wouldn't be nice to move this light (33 pounds) from room to room and not the cage? Helpful Hint: Someone recently called and asked about the ladders. We feel the designers of this stand made the decision to keep the ladder rungs 3-1/2 inches apart for the safety of the birds (so their heads couldn't get caught). We think the trade off here is the narrow steel rungs may not provide enough surface for the birds feet to grip comfortably. We remedy this by simply weaving cotton rope through the rungs. We used 1/2" cotton rope in the image below but you can use any size appropriate for your bird. -
-
3 Ladders -
2 Stainless Steel Cups -
Slide Out Plastic Tray -
Slide Out Bottom Grille -
1 Inch Hardwood Perch Not pictured (Top of the two bottom ladders -1/2 way up at the back) -
1 Inch Hardwood Perch (Bar across ring by the food cups) -
Seed Skirt -
-
-
4 Easy Roll Casters -
Assembly time: 20 - 30 minutes -
Tools required: Screwdriver flat or Phillips head (electric cuts the time by 1/3), Pliers Assembly Instructions 

| 
| 
| 
| 
| 
| | Charcoal | Bronze | White | Platinum | Blue | Green |
|